Cooper S Clubman (R55) L4-1.6L Turbo (N14) (2008)
/l4-1.6l_turbo_(n14)/Page-1829001.png)
Keyless Entry Module: Service and Repair
61 35 950 - Removing and installing (replacing) control unit for comfort access system
Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) See: Service Precautions/Vehicle Damage Warnings/Notes
on ESD Protection (Electro Static Discharge).
Note:
The comfort access system is a radio-based system and can be interfered with by radio waves from other systems (e.g. mobile phone).
Necessary preliminary tasks:
-
Remove side trim panel at rear right See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Removing and Installing Rear
Left or Right Side Trim Panel
Unscrew nuts (1).
Disconnect plug connection (2) and remove control unit for Comfort Access System.
Replacement:
Carry out vehicle programming/coding See: Testing and Inspection/Programming and Relearning/Vehicle Programming and Coding.
