Cooper S Clubman (R55) L4-1.6L Turbo (N14) (2008)
4.
Install the new waterproof connector in the same position as the old one, using 4 cable connectors and 4 shrink tubes. Be sure that the wires are in
the same positions as in the old connector.
NOTE:
The door handle side of the harness (1) should have the male end of the connector (2) secured to it.
5.
Wrap the connector with felt tape in order to prevent any future rattles.
6.
Repeat the above procedure for the left hand split door.
PARTS INFORMATION
WARRANTY INFORMATION
Covered under the terms of the MINI New Vehicle Limited Warranty.