mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Trailer Module And Trailer Coupling Release, Functional Description|Page 9780 > < Trailer Module And Trailer Coupling Release, Functional Description|Page 9778
Page 11
background image

R57: The convenience function is not available for the rear power windows.

One-touch opening

If the power window switch is operated briefly, the window is opened fully. The activating time must be less than 400 ms. Activation of the power
windows can be interrupted by pressing the power window switch again.

Anti-repeat circuit

A repeat lock is provided for each motor to prevent the power-window motors from overheating. The running time for the power-window motor is
limited. The footwell module (FRM) monitors the power-window motors. The FRM can switch off each motor individually. The last possible movement
is always a closing process.

Anti-trapping protection

The anti-trap function is active during the entire window movement in the closing direction. The indirect anti-trap function does not in principle prevent
trapping; instead, it limits the maximum permissible force applied to the trapped object. In the event of a blocking power-window motor, the current rises
above a defined value. In response. the footwell module (FRM) stops activation of the power window. The mechanical forces for the closing procedure
vary according to the ambient temperature and ageing. Consequently, the closing force is relearnt each time the sunroof closes, so that the anti-trap
function can adjust accordingly.

R57: The anti-trap function is not available for the rear power windows.

Load cut-off

To protect the battery, the power windows will not operate while the engine is being started. Every ongoing function of the power windows is halted. If
the battery voltage falls below 9 volts, the power-window motors are switched off.

No liability can be accepted for printing or other faults. Subject to changes of a technical nature.

Opening / closing on the Convertible

The power window switch in the bank of switches on the centre console for actuating all power windows is pressed downwards and held. The rear
windows are lowered simultaneously. If the power window switch is still pressed downwards after the rear windows have lowered, the front windows are
lowered simultaneously.

No liability can be accepted for printing or other faults. Subject to changes of a technical nature.

Trailer Module And Trailer Coupling Release, Functional Description|Page 9780 > < Trailer Module And Trailer Coupling Release, Functional Description|Page 9778