Cooper S Convertible (R57) L4-1.6L Turbo (N14) (2009)
Note:
For purposes of clarity, picture shows inner door panel and door window glass removed.
Special tool 00 9 324 must be correctly guided under window cavity cover strip (1).
2 - Short leg, bottom
3 - Long leg, top (TOP)
Note:
Start at the front or rear, depending on the model.
Important!
Risk of damage!
Raise window cavity cover strip (3) no more than 5 mm in each levering operation, otherwise the strip will be bent.
Position special tool 00 9 318 See: Tools and Equipment/00 9 318 Multipurpose Wedge on door trim panel (1).
Slide screwdriver (2) into special tool 00 9 324 and lever window cavity cover strip (3) upwards no more than 5 mm.
Guide special tools 00 9 324 and 00 9 318 See: Tools and Equipment/00 9 318 Multipurpose Wedge towards front/rear and lever out window cavity
cover strip (3) in the process.