Cooper S Convertible (R57) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-1070003.png)
Carry out programming/coding See: Testing and Inspection/Programming and Relearning/Vehicle Programming and Coding.
Mix-up check of brake lines.
Adjustment/calibration of steering angle sensor.
DSC Without ASC
34 52 516 - Removing and installing/replacing DSC control unit
Necessary preliminary tasks:
-
Remove hydraulic unit
Release screws (1) and carefully remove control unit (2).
Necessary preliminary tasks:
Tightening torque 34 51 1AZ See: Specifications/34 51 Slip Control System (ABS, ASC+T, DSC).
Observe following notes on installation.
