Cooper S Convertible (R57) L4-1.6L Turbo (N14) (2009)
Brake Master Cylinder: Service and Repair
Removing and Installing/Replacing Expansion Tank for Hydraulic Brake Actuation
34 31 181 - Removing and installing/replacing expansion tank for hydraulic brake actuation
Necessary preliminary tasks:
-
Read and comply with General Information See: Service and Repair.
-
Remove cover for cowl panel on left
Note:
Extract brake fluid out of expansion tank.
Use a suction bottle used exclusively for drawing off brake fluid.
Do not reuse drawn out brake fluid.
Unfasten plug connection (1) and disconnect.
Pull off supply hose (2) on clutch hydraulics.
Release screw (1) and lift off expansion tank.