Cooper S Convertible (R57) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-453002.png)
Slide in special tool 11 9 590 See: Tools and Equipment/11 9 590 Plug Mandrel in direction of arrow.
Rotate flywheel (1) at central bolt until firing TDC position at 1st cylinder is reached.
Important!
The TDC bore can be mixed up in automatic transmissions.
Important!
Check locking on VANOS adjustment unit.
Attempt to rotate inlet camshaft in direction of rotation at hexagon head.
The adjustment unit is locked in the initial position when the camshaft is non-positively connected to the adjustment unit.
If no fixed connection to the camshaft can be established, the adjustment unit is faulty and must be replaced.
Crank engine at central bolt in direction of rotation until designations (IN and EX) can be read from above.
