Cooper S Convertible (R57) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-472002.png)
Important!
Already used roller cam followers (1) may only be reused in the same position.
Detach roller cam followers (1) from HVCA element and remove.
Place roller cam followers (1) in neat order in special tool 11 4 480 See: Tools and Equipment/11 4 480 Placement Boards (2 X).
Installation Note:
Before installing camshafts, make sure roller cam followers are correctly seated (see arrow).
Assemble engine.
