mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Replacing Desiccant Insert for A/C System|Page 8968 > < A/C - Excessive Compressor Noise/Runs Rough|Page 8963
Page 1
background image

Receiver Dryer: Service and Repair
Replacing Desiccant Insert for A/C System

64 53 515 - Replacing desiccant insert for A/C system

Warning!

Risk of injury!
Refrigerant circuit is under high pressure!
Follow instructions for handling R 134a refrigerant.
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil See: Service and Repair/Procedures/Instructions for Handling Refrigerant Oil (for Refrigerant R
134a).

Important!

Risk of damage!
Restart engine only when A/C system has been correctly filled.

Necessary preliminary tasks:

-

Drawing off, evacuating and filling the A/C system See: Service and Repair/Procedures/Drawing off, Evacuating and Filling A/C System (R 134a)
are not included in the time value given for this work operation

-

Remove condenser for A/C system See: Condenser HVAC/Service and Repair

Remove protective cap (1).

Replacing Desiccant Insert for A/C System|Page 8968 > < A/C - Excessive Compressor Noise/Runs Rough|Page 8963