Mini Workshop Service and Repair Manuals

Tire Pressure Monitor Receiver / Transponder: Service and Repair

36 11 533 - Removing and installing/replacing RDC wheel electronics

Special tools required:

-

00 2 190

Important!

If the wheel electronics have been removed, the complete valve must be replaced.

Note:

If a tire sealant has been used, replace the wheel electronics.

When a tire has been removed, do not clean the rim with installed wheel electronics with high-pressure cleaning equipment.

Do not treat wheel electronics with solvents, cleaning agents etc. If dirty, wipe with a clean cloth only.

Do not clean wheel electronics with compressed air.

Necessary preliminary tasks:

-

Remove tire See: Tires/Service and Repair

Labelling of wheel electronics

1 - Transmitting frequency of wheel electronics