Cooper S Convertible (R57) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-640001.png)
Camshaft Position Sensor: Service and Repair
12 14 537 - Replacing pulse generator on inlet camshaft (N14)
Necessary preliminary tasks:
-
Switch off ignition
-
Read out fault memory of DME control unit
-
Check stored fault messages
Unlock plug (1) and remove.
Release screw and remove pulse generator (2).
Installation Note:
Replace sealing ring and coat with anti-seize agent.
Tightening torque 13 62 4AZ See: Fuel Delivery and Air Induction/Specifications/13 62 Senders for Control Unit.
Note:
Now clear the fault memory.
