Cooper S Convertible (R57) L4-1.6L Turbo (N14) (2009)
Ride Height Sensor: Service and Repair
Replacing Front Ride-Height Sensor
37 14 511 - Replacing front ride-height sensor
Important!
Observe safety instructions See: Service Precautions/Vehicle Damage Warnings/Lifting Vehicle With a Lifting Platform for raising the vehicle
Note:
Jointed rod to holder 37 14 4AZ See: Specifications/Mechanical Specifications/Suspension/Suspension Control ( Automatic - Electronic ).
Holder to control arm 37 14 5AZ See: Specifications/Mechanical Specifications/Suspension/Suspension Control ( Automatic - Electronic ).
Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) See: Service Precautions/Vehicle Damage Warnings/Notes
on ESD Protection (Electro Static Discharge).
Release screw (1).
Remove holder for ride-height sensor from front axle carrier and disconnect plug connection (3).
Installation Note:
Sensor lever (2) must point from ride-height sensor to left front wheel.
Tightening torque 37 14 2AZ See: Specifications/Mechanical Specifications/Suspension/Suspension Control ( Automatic - Electronic ).
Release nut (4) and remove jointed rod from sensor lever (2).
Installation Note:
Replace self-locking nut.
Tightening torque 37 14 4AZ See: Specifications/Mechanical Specifications/Suspension/Suspension Control ( Automatic - Electronic ).