Cooper S Convertible (R57) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-1284004.png)
Adjusting toe:
Loosen bolts (1) and (2) by approx. 1.5 turns at bearing block.
Place special tool 32 4 200 on bolt (2).
Turn special tool 32 4 200 and set toe-in to specified value.
Installation:
Tightening torque 33 32 5AZ See: Suspension/Control Arm/Specifications/Control Arms and Struts (Rear).
KDS Chassis/Wheel Alignment Check with Load Up to Design Position
32 00 150 - KDS chassis/wheel alignment check with load up to design position
Note:
-
Read and comply with General information and definitions See: Description and Operation/General Information and Definitions.
-
Read and comply with General chassis definition See: Description and Operation/General Chassis and Suspension Definitions.
