Cooper S Convertible (R57) L4-1.6L Turbo (N14) (2009)
Release screws (1) on bumper holder on right.
Tightening torque 51 11 4AZ See: Body and Frame/Bumper/Front Bumper/Specifications.
Important!
Make sure when lowering the front axle that the line is not damaged.
Unclip cable holder (2).
Cut open cable tie (3).
Installation:
Replace cable tie.
Warning!
Risk of injury!
Failure to comply with the following instructions may result in the vehicle slipping off the lifting platform and critically injuring other persons.
Make sure when supporting components that
-
the vehicle can no longer be raised or lowered
-
the vehicle does not lift off the locating plates on the lifting platform