Cooper S Convertible (R57) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-1020012.png)
Align gaiter to dimension (A) = 4 mm to shaft shoulder.
Position new 92 mm dia. stepless ear clip in gaiter groove and close with special tool 32 1 260.
Note:
The diameters of the stepless ear clips are marked on the components!
Important!
Gaiter must be vented after fitting in order to adapt the overpressure generated during fitting to the ambient pressure!
Vent gaiter; carefully slide a suitable tool between gaiter and output shaft for this purpose.
Note:
Make sure gaiter is correctly seated in groove of output shaft.
Close new 33.5 mm dia. stepless ear clip (1) with special tool 32 1 260.
Manual transmissions only:
