3000GT V6-2972cc 3.0L DOHC (1993)
HARNESS INSPECTION PROCEDURE
TROUBLESHOOTING HINTS
Hint: If the closed throttle position switch harness and individual part check results are normal but the closed throttle position switch output is
abnormal, the following troubles are suspected.
(1) Poorly adjusted accelerator cable or auto-cruise control cable
(2) Poorly adjusted fixed SAS
SENSOR INSPECTION
(1) With the accelerator pedal released, check to be sure that the throttle valve lever or the fixed SAS is pushed.
NOTE: If it is not pushed, adjust the fixed SAS.
(2) Disconnect the throttle position sensor connector.
(3) Check the continuity across the throttle position sensor connector terminal (Sensor ground) and (3) (Closed throttle position switch).