3000GT V6-2972cc 3.0L DOHC (1993)
Heated Oxygen Sensor: Service and Repair
REMOVAL
1.
Disconnect the harness terminal.
2.
Remove the sensor with a suitable socket or wrench.
Oxygen Sensor
INSTALLATION:
1.
Apply a thin coating of anti-seize compound to the threads.
NOTE: Do Not contaminate the sensor tip with compound.
2.
Install the sensor and torque to 40 - 50 Nm (30 - 36 ft.lbs.)
3.
Apply a thin coating of dielectric compound to the connector.
4.
Connect harness terminal.