3000GT V6-2972cc 3.0L DOHC (1993)
Alignment: Service and Repair
Rear Wheel Alignment
Camber
1. Make adjustment with crossmember side assist link mounting bolt loosened.
2. Adjust camber by turning lower arm mounting bolt (crossmember side). One graduation is equivalent to about 1/4° in camber.
3. If camber is adjusted, ensure toe-in is also adjusted.
Toe-In
Adjust rear toe-in by turning the crossmember side assist link mounting bolts on both sides the same amount. One graduation changes toe by
approximately 0.19 inch.
