3000GT V6-2972cc 3.0L DOHC (1993)
SYNCHRONIZER KEY AND SPRING
(1) Check for wear of the synchronizer key center protrusion.
(2) Check the spring for weakness, deformation and breakage.
SPEED GEARS
(1) Check the bevel gear and clutch gear teeth for damage and wear.
(2) Check the synchronizer cone for rough surface, damage and wear.
(3) Check the gear bore and front and rear ends for damage and wear.
REASSEMBLY SERVICE POINTS
A. BALL BEARING INSTALLATION
B. TAPER ROLLER BEARING INSTALLATION
CAUTION: When installing the bearing, push the inner race only.
C. SYNCHRONIZER RINGS FOR 1ST SPEED GEAR, 2ND SPEED GEAR INSTALLATION