3000GT V6-3.0L SOHC (1998)
Electronic Brake Control Module: Service and Repair
REMOVAL
Pre-removal Operation:
-
Rear Seat Cushion Removal.
-
Rear Seatback (RH) Removal.
-
Quarter Trim Removal.
Follow removal steps outlined in illustration.
Removal Service Point
<A> Control Unit Connector Removal.
Insert a screwdriver into the lock section as illustrated and pull out the connector from below.
INSTALLATION
Installation in reverse order as removal.
Post-installation Operation:
-
Quarter Trim Installation.
-
Rear Seatback (RH) Installation.
-
Rear Seat Cushion Installation.
-
ABS Inspection.