3000GT V6-3.0L SOHC (1998)
Fig. 11 Removing Upper & Lower Column Covers
Step 5/6: Column Cover Lower/Column Cover Upper Removal
After the screws have been removed, remove the covers. while making sure not to break the grippers.
Steering Lock Cylinder Removal
Step 10: Steering Lock Cylinder Removal
1. Insert the ignition key into the steering lock cylinder and place the key in the ACC position.
2. Press the lock pin down with a Phillips head screwdriver (small-size one) to remove the steering lock cylinder.
Installation
To Install reverse the steps listed in the image and note the following.
Step 10: Column Switch And Clock Spring Assembly Installation
Align the mating marks of the clock spring and, after turning the front wheels to the straight-ahead position, install the clock springs to the column
switch.
Mating Mark Alignment
Turn the clock spring clockwise fully, and then turn back it approx. 3 4/5 turns counterclockwise to align the mating marks.
CAUTION: If the clock spring's mating marks are not properly aligned, the steering wheel may not rotate completely during a turn, or the flat cable
within the clock spring may be severed, obstructing normal operation of the SRS and possibly leading to serious injury to the vehicle's driver.
