3000GT AWD V6-2972cc 3.0L DOHC Turbo (1991)
7.
Insert one C-clip underneath each of the two loosened inboard screws. Make sure that the C-clips are placed between the front plate and the main
body of the turn signal switch. Refer to Figure 4.
NOTE:
A supply of C-clips is provided with this TSB.
8.
Tighten the two inboard screws on the front plate of the turn signal switch. The clearance created by the two C-clips will allow the ratchet lever to
operate without binding.
9.
Assemble in reverse order, making sure not to over-tighten any of the screws.
10.
Reset radio presets and digital clock.
WARRANTY INFORMATION
Usual warranty procedures apply.
Repair time allowance:
0.3 hours
Warranty condition code:
KPS18250
