3000GT AWD V6-2972cc 3.0L DOHC Turbo (1991)
Oxygen Sensor: Service and Repair
Rear Oxygen Sensor
Rear Oxygen Sensor Installation And Removal Tool
REMOVAL
1. Disconnect the harness terminal.
2. Remove the sensor with a suitable socket or wrench.
Oxygen Sensor
INSTALLATION:
1. Apply a thin coating of anti-seize compound to the threads.
NOTE: Do Not contaminate the sensor tip with compound.
2. Install the sensor and torque to 30 ft.lb (42 Nm.).
3. Apply a thin coating of dielectric compound to the connector.
4. Connect harness terminal.