3000GT AWD V6-2972cc 3.0L DOHC Turbo (1991)
1. Move the transaxle shift lever to the neutral position. The select lever will be set to the neutral position when the transaxle shift lever is moved to
the neutral position.
2. With the shift lever on the passenger compartment side in the neutral position, turn adjuster on select cable so that select cable end is positioned as
shown with reference to lever B of shift lever.
3. Install the select cable so that the flange side of the plastic bushing at the end of select cable is on the end face side of lever B.
4. Turn adjuster on shift cable so that shift cable end is positioned as shown with reference to shift lever on the passenger compartment side.
5. Install the shift cable so that the flange side of the plastic bushing at the end of shift cable is on the split pin side.
6. Connect the shift cable, then turn adjuster on shift cable so that dimension A equals dimension B.
7. Move the shift lever to each position and check that the shifting is smooth.
3. Installation of vacuum pipe.
