3000GT AWD V6-2972cc 3.0L DOHC Turbo 24 Valve (1996)
Rocker Arm Assembly: Service and Repair
Instalation of Camshaft & Rocker Arm
Installation procedure:
Note: Lubricate all internal parts with engine oil during reassembly.
1. Lash adjuster.
2. Rocker arm.
3. Camshaft.
a. Turn the crankshaft to bring No.1 cylinder to the top dead center.
b. Check that the rocker arm is installed correctly on the lash adjuster and valve.
c. Install the camshaft while noting the identification mark (stamped on the hexagon section).
