mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

California|Page 2575 > < Throttle Body - Overhaul Procedure Revision|Page 2572
Page 1
background image

Throttle Body: Testing and Inspection
California

These checks are to be performed with the engine coolant temperature at 80 - 95°C (176 - 205°F).

EGR VALVE, CONTROL VACUUM CHECK 

EGR Vacuum Port Location

1. Disconnect the vacuum hose from the throttle body EGR vacuum fitting and connect a hand vacuum pump to the fitting.

EGR Port Vacuum Curve

2. Start the engine and check to see that, after increasing the engine speed, vacuum raises proportionate to engine speed.

PURGE CONTROL PORT VACUUM CHECK 

Purge Hose Vacuum Source

1. Disconnect the vacuum hose from the throttle body purge hose fitting and connect a hand vacuum pump to the fitting.

California|Page 2575 > < Throttle Body - Overhaul Procedure Revision|Page 2572