3000GT AWD V6-2972cc 3.0L DOHC Turbo 24 Valve (1996)
Engine Coolant Temperature Switch (A/C): Service and Repair
REMOVAL
1. Drain approximately 2 quarts of coolant from the radiator drain plug.
2. Disconnect the electrical connector.
3. Remove the sensor with a suitable socket.
Coolant Temperature Sensor
INSTALLATION
1. Apply sealant to the threaded portion of the sensor.
2. Install the sensor and tighten to 30 Nm (22 ft.lbs).
3. Reconnect the electrical connector.
4. Refill the radiator and check for leaks.
