3000GT AWD V6-2972cc 3.0L DOHC Turbo 24 Valve (1996)
15. Remove starter electrical connections, then the starter assembly.
16. Reverse procedure to install, noting the following:
Fig. 2 Mounting Stopper Installation
a. Install mounting stopper as shown, Fig. 2.
b. Torque starter bolts to 65 ft. lbs.
c. Torque right-hand crossmember bolts to 43-51 ft. lbs.
d. Torque lower ball joint nut to 43-52 ft. lbs. and tie rod end nut to 36 ft. lbs.
e. Torque transaxle mount bracket bolts to 51 ft. lbs.
f.
Torque clutch tube bracket bolts to 13 ft. lbs.
g. Torque transfer assembly mounting bolts to 61-65 ft. lbs.
