mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Hard Top - Operational Characteristics|Page 4033 > < Hard Top - Operational Characteristics|Page 4031
Page 4
background image

Dealers enrolled as Spyder Service Centers are listed in this bulletin. Vehicles to be transported to a designated Spyder Service Center should first be
inspected, using a copy of the Dealer Inspection Form in this bulletin. It is the originating dealer's responsibility to complete this form. On the form, note
any damage to the interior and exterior of the vehicle. Copies of the Dealer Inspection Form must be sent with the vehicle and kept in the originating
dealer's file.

Upon receipt of the vehicle, the Spyder Service Center will inspect the vehicle and confirm its condition as documented on the Dealer Inspection Form.
The Spyder Service Center must keep a copy of the form for their files. Any additional damage not noted by the originating dealer should be reported
immediately to that dealer. This will insure accountability for the vehicle by both parties.

PARTS INFORMATION

To obtain retractable hardtop replacement part numbers, refer to your Mitsubishi parts fiche which contains Mitsubishi part numbers and illustrations of
the retractable hardtop assemblies. Parts can be obtained through the standard Diamond Net parts ordering system.

WARRANTY INFORMATION

Hard Top - Operational Characteristics|Page 4033 > < Hard Top - Operational Characteristics|Page 4031