mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Cooling System > < Cooling System - Water Pump Leak Inspection|Page 1795
Page 2
background image

5. Reverse procedure to install, Fig. 48, noting the following:

Fig. 54  Installing Water Pump

a. Install water pump bolts in correct location as shown, Fig. 49.
b. Replace inlet water pipe O-ring at both ends and apply water to O-ring to help installation. Do not allow engine oil or other contaminates to

adhere to O-ring.

Cooling System > < Cooling System - Water Pump Leak Inspection|Page 1795