3000GT Convertible AWD V6-2972cc 3.0L DOHC Turbo (1995)
Air Bag(s) Arming and Disarming: Technician Safety Information
1. In order to avoid injury to yourself or others from accidental deployment of the air bag during SRS servicing, read and carefully follow all the
precautions and procedures described in this manual.
2. Do not use any electrical test equipment on or near SRS components, except those specified. Never use an analog ohmmeter.
3. Never Attempt to Repair the Following Components:
-
Front Impact Sensors
-
SRS Diagnosis Unit (SDU)
-
Clock Spring
-
Air Bag Module
If any of those components are diagnosed as faulty, they should only be replaced, in accordance with the COMPONENT SERVICE procedures in
this manual.
4. Do not attempt to repair the wiring harness connectors of the SRS. If any of the connectors is diagnosed as fault, replace the wiring harness. If the
wires are diagnosed as faulty, replace or repair the wiring harness according to the table above.
NOTE:
(1) The sensor cable marked with * is available as service part.