3000GT Convertible AWD V6-2972cc 3.0L DOHC Turbo (1995)
Alignment: Service and Repair
Rear Wheel Alignment
Camber
1. Measure camber with a camber/caster/kingpin gauge.
Fig. 3 Rear Camber Adjustment
2. Adjust camber by moving mounting bolt located on crossmember side of lower arm. One graduation is equivalent to about 1/5° in camber, Fig. 3.
Toe-In
1. Adjust rear toe-in by moving mounting bolts located on crossmember side of the trailing arm.
Fig. 5 Rear Toe-In Adjustment
2. Make adjustment by moving left and right bolts equally. One graduation changes toe by approximately 0.08 inch, Fig. 5.