3000GT Convertible AWD V6-2972cc 3.0L DOHC Turbo (1995)
Right Intercooler Piping, Alignment Points
1.
Remove air hose C.
2.
Remove air hose D.
3.
Remove the right side intercooler air duct.
4.
Remove the right intercooler.
REMOVAL, LEFT INTERCOOLER AND AIR PIPES (REAR TURBOCHARGER)
Left Intercooler Piping, Alignment Points
1.
Disconnect and remove air hose G.
2.
Remove the mounting bolts and remove air pipe A.
3.
Disconnect and remove air hose B.
4.
Disconnect and remove air hose E.
5.
Remove the mounting bolts and remove air pipe B.
6.
Remove the mounting bolts and remove air pipe C.
7.
Disconnect and remove air hose F.
8.
Remove the engine oil cooler from its mountings.
9.
Remove the left intercooler air duct.
10.
Remove the left intercooler.
INSPECTION
1. Check the intercooler fins and tubes for punctures, bends or clogging by foreign matter.
2. Inspect the air hoses and air pipes for cracks, brittleness or punctures.
CAUTION: Be careful not to allow any dirt or other foreign objects to enter the hoses, pipes or intercooler.
INSTALLATION
Install in the reverse order of disassembly.
Torque, intercooler to body: 12 - 15 Nm (9 - 11 ft.lbs.)
Torque, air pipe bolts: 12 - 15 Nm (9 - 11 ft.lbs.)
Torque, air hose clamps: 4 Nm (3 ft.lbs.)
