3000GT Convertible AWD V6-2972cc 3.0L DOHC Turbo (1995)
Park/Neutral Position Switch: Service and Repair
1. Place selector lever in Neutral position.
2. Place manual control lever in Neutral position, then remove control lever retainer and lever.
3. Disconnect electrical harness, then remove switch retaining bolts and switch assembly.
4. Reverse procedure to install, then adjust as follows:
a. With manual control lever in Neutral position, rotate switch body until wide end of control lever overlaps switch body flange.
b. Hold switch body in position, then torque retaining bolts to 7-9 ft. lbs.
