mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Fuel System Pressure Relief|Page 4063 > < Battery - Application Guide/Cold Cranking Amp Specs.|Page 4060
Page 1
background image

Battery: Service Precautions
Fuel System Pressure Relief

Before any fuel system service can be performed, the fuel pressure in the fuel system must be released to prevent personal injury or damage to the
vehicle.

1. Remove fuel gauge cover in luggage compartment.
2. Disconnect fuel pump harness connector.
3. Start engine and allow to idle.
4. When engine stops idling, turn ignition switch to Off position.
5. After fuel system repairs are complete, connect fuel pump harness connector.
6. Apply body sealant No. 8509, or equivalent, to fuel gauge cover, then install cover.

Fuel System Pressure Relief|Page 4063 > < Battery - Application Guide/Cold Cranking Amp Specs.|Page 4060