3000GT Convertible AWD V6-2972cc 3.0L DOHC Turbo (1995)
b. Remove caliper assembly and support to frame using suitable wire.
c. Using end yoke holder tool No. MB990767-01, or equivalent, secure axle hub and remove companion flange self-locking nut.
d. Using axle puller and slide hammer tools, No. MB990211-01 and MB990241-01, or equivalents, remove rear axle hub.
e. Press off ABS rotor from axle hub.
f.
Press off outer bearing and dust shield from axle hub.
g. Using seal remover tool No. MB990938-01 and MB990928-01, or equivalents, remove axle hub seal and inner bearing from axle housing.
2. Reverse procedure to install, noting the following:
a. Install inner bearing using bearing installer tool Nos. MB990931-01 and MB990938-01, or equivalents.
b. Install oil seal using oil seal installer tool No. MB990931-01, or equivalent. Apply multi-purpose grease to lip of oil seal.
c. Install dust shields using ball joint dust cover installer tool No.MB990799-01, or equivalent.
d. Install outer bearing after applying multi-purpose grease to bearing surfaces.
e. Install ABS rotor with groove in surface pointing toward axle shaft flange.