3000GT SL V6-2972cc 3.0L DOHC MFI (1997)
Brake Pedal Assy: Adjustments
-
Check the bushing for wear.
-
Check the brake pedal for bend or twisting.
-
Check the brake pedal return spring for damage.
1. Turn up the carpet under the brake pedal.
Measure Brake Pedal Height
2. Measure the brake pedal height as illustrated. The standard value for "A" is 177 - 182 mm (7.0 - 7.2 inch). If the brake pedal height is not within
the standard value, adjust as necessary.
1. Disconnect the stop light switch connector.
2. Adjust the brake pedal height by turning the operating rod with pliers (with the operating rod lock nut loosened), until the correct brake pedal
height is obtained.
3. Secure by tightening the lock nut of the operating rod.
4. Push the stop light switch in the direction of the pedal stroke until it stops. (The switch will slide if it is pushed firmly).
Tighten Lock Nut
5. Lift up the pedal until the operating rod is fully extended, and then slide the stop light switch back to the required position. Adjust the position of
the switch by turning it until the distance shown in the illustration is correct.
6. Connect the connector of the stop light switch.
7. Check that the stop light is not illuminated with the brake pedal released.
