3000GT SL V6-2972cc 3.0L DOHC MFI (1997)
5. After disconnecting the battery cable, wait 60 seconds or more before proceeding with the following work. The SRS system is designed to retain
enough voltage to deploy the air bag for a short time even after the battery has been disconnected, so serious injury may result from unintended air
bag deployment if work is done on the SRS system immediately after the battery cables are disconnected.
6. SRS components should not be subjected to heat over 93°C (200°F), so remove the SRS-ECU, air bag module and clock spring before drying or
baking the vehicle after painting.
7. Whenever you finish servicing the SRS, check warning light operation to make sure that the system functions properly.
8. Make certain that the ignition switch is OFF when the scan tool is connected or disconnected.
9. If you have any questions about the SRS, please contact the MMSA Tech Line.
NOTE: SERIOUS INJURY CAN RESULT FROM UNINTENDED AIR BAG DEPLOYMENT, SO USE ONLY THE PROCEDURES AND
EQUIPMENT SPECIFIED.
