3000GT SL V6-2972cc 3.0L DOHC MFI (1997)
Speedometer Check
6. Attach anchoring bars on the tie-down brackets and secure their ends to the anchor plates.
7. Make sure the tension on the right and left bars is the same. Also be sure there is enough tension on each bar.
8. Attach a chain or wire to the rear tie-down hole. Make sure the end of the wire or chain is secured firmly.
9. Take all other necessary precautions.
10. Use a speedometer tester to measure the speedometer's indication error.
Standard Indication mph
Allowable Range mph
20
19-22
40
38-44
60
57-66
80
76-88
100
94-110
CAUTION: Do not operate the clutch or accelerator abruptly or decelerate during the operations.
