mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Headlamp Relay > < Headlamp Control Module|Locations
Page 1
background image

Headlamp Control Module: Testing and Inspection

Light Automatic Shut-off Unit Check

Light Automatic Shut-off Unit Check Chart

1. Remove the quarter trim.
2. Keeping the connector connected to the light automatic shut-OFF unit, connect the test light (12 V-3.4 W) from the harness side to terminal No. 6

(for tail lights) or No. 7 (for headlights). Under the following conditions, check the operation of the test light.

Headlamp Relay > < Headlamp Control Module|Locations