mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Tail Lamp Relay > < Lamp Control Module|Locations|Page 6487
Page 1
background image

Lamp Control Module: Testing and Inspection

Light Automatic Shut-off Unit Check

Light Automatic Shut-off Unit Check Chart

1. Remove the quarter trim.
2. Keeping the connector connected to the light automatic shut-OFF unit, connect the test light (12 V-3.4 W) from the harness side to terminal No. 6

(for tail lights) or No. 7 (for headlights). Under the following conditions, check the operation of the test light.

Tail Lamp Relay > < Lamp Control Module|Locations|Page 6487