3000GT SL V6-2972cc 3.0L DOHC MFI (1997)
-
Ignition switch: ON
Voltage: Battery positive voltage
OK: GO TO STEP 2
NG: Repair the harness. (MFI relay-A2) (MFI relay-A5)
STEP 2: Check for an open-circuit, or a short-circuit to ground between the engine control module and the idle air control motor.
-
Engine control module connector: Disconnected
-
Idle air control motor connector: Disconnected
OK: STOP
NG: Repair the harness. (A1-4) (A3-17) (A4-5) (A6-18)
Checking for Operational Sound
1. Check that the operation sound of the stepper motor can be heard after the ignition is switched ON (but without starting the motor).
2. If the operation sound cannot be heard, check the stepper motor's activation circuit.