3000GT SL V6-2972cc 3.0L DOHC MFI (1997)
DISASSEMBLY AND REASSEMBLY
DISASSEMBLY SERVICE POINTS
(A) THROTTLE POSITION SENSOR AND IDLE AIR CONTROL MOTOR REMOVAL
1. Do not disassemble the sensor and motor.
2. Do not clean the sensor and motor by dipping them into cleaning solvent. Clean them with shop towel.
(B) THROTTLE BODY REMOVAL
1. Do not remove the throttle valve.
2. Check if the vacuum port or passage is clogged. Use compressed air to clean the vacuum passage.
REASSEMBLY SERVICE POINTS
(A) THROTTLE POSITION SENSOR INSTALLATION
