3000GT SL V6-2972cc 3.0L DOHC MFI (1997)
HARNESS INSPECTION
STEP 1: Measure the line voltage of the vehicle speed sensor.
-
Connector: Disconnected
-
Ignition switch: ON
Voltage: Battery positive voltage
OK: GO TO STEP 2
NG: Repair the harness. (A1-Ignition switch)
STEP 2: Check the vehicle speed sensor output circuit for continuity.
-
Engine control module connector: Disconnected
-
Ignition switch: ON
-
Move the vehicle
Continuity: Continuity and no-continuity are repeated alternately
OK: STOP
NG: GO TO STEP 3
STEP 3: Measure the power supply voltage of the vehicle speed sensor.
-
Connector: Disconnected
-
Ignition switch: ON
Voltage: 4.5-4.9 V
OK: GO TO STEP 4
NG: Repair the harness. (A3-86)
STEP 4: Check for continuity of the ground circuit.
-
Connector: Disconnected