3000GT SL V6-2972cc 3.0L DOHC MFI (1997)
Transmission Speed Sensor: Testing and Inspection
A CHECK
1. Disconnect the pulse generator A connector
2. Measure the resistance between the pulse generator A side connector terminals 1 and 2.
Standard value: 330-390 ohms [at 20° C (68°F)]
3. If the resistance is outside the standard value, replace the pulse generator assembly.
B CHECK
1. Disconnect the pulse generator B connector.
2. Measure the resistance between the pulse generator B side connector terminals 3 and 4.
Standard value: 330-390 ohms [at 20° C (68° F)]
3. If the resistance is outside the standard value, replace the pulse generator assembly.
