mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Charging System > < Battery Inspection|Page 4665
Page 1
background image

Battery: Service and Repair

WARNINGS:  

-

When batteries are being charged, an explosive gas forms beneath the cover of each cell. 

-

Do not smoke near batteries on charge or which have recently been charged. 

-

Do not break live circuits at the terminals of the batteries on charge. A spark will occur where the live circuit is broken. 

-

Keep all open flames away from the battery.

CAUTION:  Battery electrolyte temperature may temporarily be allowed to rise to 55°C (131°F). Increase of electrolyte temperature above 55°C (131 °
F)
 is harmful to the battery, causing deformation of battery cell, decrease in life of battery, etc.

Battery Charging

CHARGE RATE

If the test indicator is white, the battery should be charged as outlined below. When the dot appears or when maximum charge shown is reached,
charging should be stopped.

NOTE:  When the charging is performed at 5 Amps, charging is virtually 100 % three hours after the indicator's indication changes from white to green.
Use fast charging only in an emergency. If the indicator does not turn to green even after the battery is charged, the battery should be replaced; do not
overcharge.

Charging System > < Battery Inspection|Page 4665