3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
<A> Shoe Hold-Down Cup Removal.
Expand the shoe & lining assembly and remove the shoe hold-down cup
Follow removal steps outlined in illustration.
NOTE: The figure shows the left wheel; for the right wheel, the position in symmetrical.
INSTALLATION
Installation in reverse order as removal.
Installation Service Points
>A< Shoe To Anchor Spring Installation.
The shoe-to-anchor spring must be installed in the sequence shown in the illustration.
CAUTION: Each shoe-to-anchor spring has a unique spring load and the spring "a" is painted to prevent erroneous installation.
>B< Adjuster Installation.
Install the adjuster facing the left adjusting bolt to the vehicle front and right adjusting bolt to the vehicle rear.
Post-installation Operation:
-
Parking Brake Lever Stroke Adjustment.
-
Front and Rear Console Installation.