3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
Idle Air Control Motor: Component Tests and General Diagnostics
OPERATION
-
The intake air volume during idling is controlled by opening or closing the servo valve provided in the air path that bypasses the throttle valve.
-
The servo valve is opened or closed by operating the stepper motor in the speed control servo in normal or reverse direction.
-
The battery power is supplied to the stepper motor through the MFI relay. As the engine control module turns on power transistors in the module
one after another, the stepper motor coil is energized and the motor rotates in normal or reverse direction.
TROUBLESHOOTING HINTS
Hint 1: If the stepper motor step increases to 100 to 120 steps or decreases to 0 step, faulty stepper motor or open circuit in the harness is
suspected.
Hint 2: If the idle air control motor harness and individual part checked good but the stepper motor steps are out of specification, the following
faults are suspected.
(1) Poorly adjusted reference idle speed
