Diamante V6-3.5L SOHC (2003)
Keyless Entry Transmitter Battery: Service and Repair
ON VEHICLE SERVICE
REPLACING THE BATTERY
1. Remove the set screw to remove the battery from the transmitter.
2. Insert a new battery with the + side down.
Replacement battery: Lithium battery CR2032
3. Insert the claw first, and with care not to displace the 0-ring, assemble the transmitter.
CAUTION: Be careful not to deform the battery electrodes when replacing, ensure that water and dirt do not enter, and that you do not directly
touch the printed circuit board.
4. Check to see if the keyless entry system operates.