Diamante V6-3.5L SOHC (2003)
Coolant: Testing and Inspection
ENGINE COOLANT LEAK CHECK
1. Confirm that the coolant level is up to the filler neck. Install a radiator cap tester and apply 160 kPa (23 psi) pressure, and then check for leakage
from the radiator hose or connections.
CAUTION:
-
Be sure to completely clean away any moisture from the places checked.
-
When the tester is taken out, be careful not to spill any coolant from it.
-
Be careful, when installing and removing the tester and when testing, not to deform the filler neck of the radiator.
2. If there is leakage, repair or replace the appropriate part.
